The process of a car tune up differs slightly from the maintenance of an internal combustion engine but is an essential part of keeping a vehicle's engine running optimally. The costs and timing of these processes will vary greatly between various models and years, however a simple regular tune up will usually cost $50-to-$200, while even more complicated tasks could range from a few hundred to a few thousand dollars. While many people believe that regular oil changes are sufficient for keeping a car or truck in top condition, it is actually the lack of an annual tune up which is the number one cause of engine problems. However, it is possible to greatly extend the life of your engine by performing regular tune ups. Although there are many reasons why a vehicle may need a tune up, most experts will agree that the most common reason is the lack of an accurate timing belt replacement. Because timing belts are not cheap to replace, a majority of vehicle owners will schedule a replacement for the mass air flow sensor (MAF) at around 6 months after the engine has been purchased. While this seems like a good idea, the timing belt replacement can actually be delayed by as much as three to four months if the MAF is not properly calibrated. You can read more about tuning up your car or get the right services at now. Before scheduling the tune up, make sure to get the vehicle inspected by a licensed mechanic to make sure there are no obvious issues. It is also suggested that the car be taken for a professional spark-up to ensure that the spark plug holes are tightly sealed. Another recommended procedure is to change the air filter at least once per month. If you decide to go ahead with the scheduled tune up, it is highly suggested that you change the filter before the scheduled tune-up date, however, because the filter will need to be replaced after the tune up anyway to prevent any possible gumming up of the air passages. After you have completed the maintenance, you can start the process by going through all of the required steps of preparation. Next, the fuel system will need to be cleaned and any possible sources of clogging removed. Then, it is time to check the air filters to make sure that they are clean and clear of any and all obstructions. If the air filters are clogged, then you will need to purchase new ones. The final step of tuning up a vehicle is to add the correct amount of compression timing fluid to the tanks and spark plugs. In order to get the best possible performance from your engine, it is crucial that you change your complete hoses, fluids, and spark plugs at the same time. After your vehicle is cleaned and everything ready to go, you should plug in your engine and run it for about five minutes to allow the fuel mixture to flow through the carburetor and burn completely through. When it is finished, make sure that you disconnect all of your necessary wires. Before you go about replacing any other wires, make sure that they are cool because you may find them a little warm. When everything is reconnected, you should make sure that you follow the instructions that come with your fuel injection systems. Some of the things you will have to do include: change the fuel filter, and clean and clear the combustion chamber. You can now put your spark plugs back in and make sure that they are secure. Finally, you can fill your fuel tank with new fuel and run it for five minutes. Before you go about refilling your tank, make sure that the auto parts store has completely refilled your tanks because if they have run out of fuel, you will not be able to complete any tune ups until you have fuel to fill your tank. You can read more on this here: https://www.youtube.com/watch?v=Dc7HILEhZ5w.
0 Comments
Leave a Reply. |
ArchivesCategories |